Jurien Pool and Spa Wader
Spa Wader Details
- 3m x 2.4m
- Platform Area 1.5m x 2.4m
- Platform Depth 400mm
- Spa Area 1.5m x 2.4m
- Spa Depth 1m
- NOTE Balance Lines are used to allow for single filtration system to run
- IMPORTANT NOTE Overall length includes 600mm gap between pool and Spa
Standard inclusions with every Pool from FACTORY POOLS PERTH.
- Fibreglass pool shell manufactured to Australian standards AS/NZS 1838. All products used are Lloyds of London approved which allows FACTORY POOLS
PERTH to offer a Lifetime Structural Warranty.
- Skimmer box to AS 2818 (Customise your Skimmer lid to match paving, optional extra)
- Standard bobcat to excavate sandy flat site including removal of clean fill within a 10km radius. (tip fees not included) standard bobcat requires
2m width and 2m height for access. Ramp in space is required for bobcat & if not possible additional charges for excavator will apply.
- High Performance swimming pool grade gelcoat and fibreglass to help protect against UV & pool chemicals.
- Delivery & installation of pool within 80km of Perth CBD.
- 55T Crane allowance (generally 32m reach depending on pool size).
- Electrical connection up to 40m with a double weatherproof GPO wired back to the meter box with separate circuit breaker. (subject to inspection by
our licenced electrician)
- High flow Australian made cartridge or sand filter sized to suit pool without upgrade cost.
- Heavy duty Australian made self-cleaning salt water chlorination with auto timer.
- Heavy duty Australian made high flow pool pump to suit pool without upgrade cost.
- 50mm suction line from skimmer box to pump.
- Pre-cast concrete slab to suit pool filtration.
- Mounting post if required to suit controllers & light transformers.
- Choices of six stunning colours, all gelcoats used are ISO NPG swimming pool grade specification offering seven years internal warranty.
- Pool accessories kit consisting of: manual vacuum head, telescopic handle, leaf scoop, broom, & water test kit.
- Pool clean and equipment demonstration on handover including start-up chemicals.
- SPASA Members with completion guarantee assurance.
NOTE: SPASA Statutory fees & charges are additional.
For more details please ring FACTORY POOLS PERTH on (08)6391 0301 or email us at [email protected]